Posts Tagged ‘Mixer

08
Jun
12

Bits & Pieces 4

I wasn’t expecting to add this post just yet, but I had a stroke of luck which has enabled me to complete the scheme for my mono mixing section which I started writing about when I described the Red Dragon the other day.

I bought a job lot of small SoundLab mixers off eBay which were said to be faulty returns.  I thought I might be able to salvage some parts from them, use bits of them in some way, or even repair them – but it turned out that several of them appeared to be in working order.

Two of them were straightforward 4 channel mono mixers – an updated version of the one I had used before, I presume – so these were immediately used for the left and right channel inputs to the mono mixer, as I described in the previous post.  Generally speaking, I wanted to have the lower tones to the left and higher tones to the right, so my ‘double bass’ stylophone was the first thing to be plugged into the left mixer; the treble stylophone and the SoftPot Stylophone in the right.

4 Mixerssm

More interestingly, the two other working units were the G105C version with ‘microphone effects’ – a delay circuit which I guessed was probably based on a PT2399.  I opened up one of the dead ones, and found that this was the case.

The circuitry was very different from the original SoundLab mixer I’d acquired – all surface-mount components; everything, pots and sockets included, firmly fixed to a single circuit board – and I’m not sufficiently skilled or equipped to be able to repair something like that.  Not only was it not functioning, it seemed to short out the power when the on switch was pressed.

I sawed out the part of the circuit with the PT2399 on it, which didn’t short the power when used by itself, but didn’t do anything to the input sound either.  This section is permanently in circuit when the mixer is operating, so maybe that was why the original unit didn’t work.  In any event, I decided to put the broken ones away for another day, and concentrate on the ones that worked.  The case would find a use later on.

First of all an echo unit is a really useful thing to have – and 2 echo units with 4 inputs is a bonus!

My initial arrangement with these is to have the outputs connected to the new Left and Right Mixers.  The left echo unit is used for instrument input and the output is divided: one half of the output going directly to the Left Mixer, the other half going to the right echo unit, and from there to the Right Mixer.  As the delay time and feedback (number or length of repeats) are separately adjustable on the two units, some interesting stereo effects are possible.

16
May
12

Bits & Pieces 2

This Bits and Pieces post is about mixers.  There is nothing inherently new or exciting in my system, which isn’t complete yet, but it’s building up to something more interesting in the latter stages.

The part I’ve been working on is the section for mono instruments, which works like this:

First of all I started with a small 4-channel mono in-mono out Soundlab Micromixer for £6 or £7 on eBay.

Fortunately, this came with a circuit diagram, so it was easy to add 4 more identical input channels.  These are housed in the ‘Red Dragon’, a Stylophone case from which the innards had been removed (for use, I think, in The Gemini, which is two Stylophone circuits in one body).

Red Dragon_Mixer bonnet 2 IMG_0917

The Red Dragon feeds the Micromixer with 9v power as well as the 4 extra input channels (the ones with red caps).  But I like working in stereo, so the 4 extra inputs are switchable from mono to stereo: the stereo side of the switch sends the input via a passive mixer (a 10k resistor on each channel) into the input of a pseudo-stereo circuit, and from there to a stereo output socket.

I’ve lost the circuit diagram and explanation of the pseudo-stereo circuit, but it was published in an electronics magazine in the 1980’s, and I bought and made up a kit version from them.  It may even have been the work of the amazingly prolific RA Penfold.  At the time I used it to listen to mono cassette tapes on my Walkman, and it improved them no end.  An empty cassette box was just big enough for the circuit board, headphone socket and PP3 battery; it was still in this box when I recently found it, and needed only a replacement 741 op-amp, which had evidently been scavenged at some point in the past.

I don’t remember precisely how it works, but it seems to be some sort of frequency-dependent phase-shifter, whereby some frequencies are sent to the left ear, some to the right, spreading a single mono signal throughout the stereo field: perfect for sounds with a rich harmonic content – like the Stylophone, for example.  (Mono instruments The Alien and The Hedgehog are ideal candidates for this treatment).  Which one of the channels is ‘left’ and which is ‘right’ using this system seemed entirely arbitrary to me, so I added a switch to reverse the output channels, according to taste.

In fact, there was room for two more input channel pots on the top of the Stylophone case, but no room for the switches and circuitry beneath, so these two channels (the ones with blue caps) go directly into the passive mixer and pseudo-stereo.

While the stereo signal currently goes directly to a stereo in-stereo out mixer, the mono output goes to a 6-channel mono in-stereo out mixer (a Realistic 32-1210, £10 off eBay) .  This has a balance control on each channel, so the intention is that the section described here will be the centre channel, and there will be further sub-sections for left and right parts of the stereo field.  Later posts will indicate how this works out.

The stereo in-stereo out mixer (£6 off eBay) is a Hama SM502.  Although the inputs of this mixer are marked ‘Microphone’, ‘Magnetic/Ceramic cartridge’, ‘Phono’ and ‘Tape’ (i.e. it’s a mixer intended for a domestic hi-fi!) experiments have shown that they work fine with the signal levels involved here.

Red Dragon_Mixer bonnet 1 IMG_0916




andymurkin

December 2021
M T W T F S S
 12345
6789101112
13141516171819
20212223242526
2728293031  

Enter your email address to follow this blog and receive notifications of new posts by email.